Door Seal

Emerald Planet Lower Door Seal

Installation Guide

Assessment

Determine whether the seal should be attached to the inside or outside of the door. If it works equally well on either choose the inside of the door.

Measurement

  • Before removing the adhesive backing, determine the correct position of the door seal.
  • Mark the correct position on the door (The flexible strip should form a light seal with the floor when closed and move smoothly across the floor when the door is opening/closing.)
  • Cut the door seal to the required length using hand shears (i.e. Tin Snips or Garden Secateurs/Pruning Shears).

Surface Preparation

  • Ensure the surface of the door where the door seal will be affixed is dry, smooth, clean and if painted, well cured.
  • If cleaning is required, ensure all cleaning products are wiped from the surface before installation.

Application

  • With the door in a closed position, remove the adhesive backing and affix the door seal to the marked position on the door and press firmly.
  • Best results are achieved when adhesion temperature is at least 20ºC. If possible, allow to cure fully before opening the door. Full adhesion strength may take a few days.
Scroll to Top